An adaptor to connect E1 tributary coaxial cables to the DmSTM-1 TR-24E1 card. Provides connections for 12 E1 interfaces on each AD-TL50, wired directly to the DID without the need for intermediary connections. 75ohms

An adaptor to connect E1 tributary coaxial cables to DM705-E1-16, DM800-IC32E1 and DM800-IC32E1P cards. Provides connections for 16 interfaces on each AD-TL64, wired directly to the DID without the need for intermediary connections. 75ohms.

Aimed at E1 (G.703 to 2048kbit/s) signal coupling with an impedance of 75ohms to signals with an impedance of 120ohms. Coupling is achieved through transformers, fostering galvanic isolation.

Cable for 32 E1 interfaces, with LFH connector for interconnections in RB-13. Available in different lengths.

The DM705-CPU128 module has a cross connection capacity of up to 260 lines of 2 Mbit/s each. The SDH drop capacity on each HS-STM-1 interface is 63 VC-12. It can operate on CPU redundancy mode. Management of up to 24 remote network elements with PPP/Frame Relay protocol.

A cable for connection to the DM820-ICRHK card, providing alarm inputs and outputs, 1 V.11 port and external clock inputs and outputs.

The DM705-CPU128 module has a cross connection capacity of up to 61 lines of 2 Mbit/s each. The SDH drop capacity on each HS-STM-1 interface is 32 VC-12. It can operate on CPU redundancy mode. It can manage up to 24 remote network elements with PPP/Frame Relay protocol.

Cable for 12 E1 interfaces, with CHAMP 50 pin connector for interconnections in RB-50. Available in different lengths.

Allows DsSTM-1 external synchrony output and input ports to be interlinked to other pieces of equipment, using coaxial cables with a BNC connector.

The DM705-E1-16 interface module is equipped with 16 ports E1 (G.703 and G.704 ITU-T standard). Allows CAS cross connection, framed and unframed mode and link redundancy.

The DM705-E1 interface card is equipped with one E1 port, according to G.703 and G.704 of ITU-T. It can cross connect CAS, operate in framed or unframed mode and can form redundant links.

The DM705-FO2 interface module is equipped with 2 optical ports that operate with 20M frame (transporting up to 4 E1s) or single E1.

A multichannel cable for 12 E1 120ohm interfaces, with a CHAMP 50 pin connector for interconnections to DmSTM-1 and a twisted pair unconnected output, for a direct link to a terminal block. Total length - 10 m.

The DM705-FO interface module is equipped with 1 optical port that can operate with 20M frame (transporting up to 4 E1s) or single E1.

An equipment access cable using a microcomputer serial port. Length - 2 m.